Pairs of MagWings can be anchored flat or pivoted to allow mounting to cylindrical ferromagnetic surfaces. Customers can design their own bases for the MagWing to mount drills, COBOTs, or other tools to make work faster, safer and easier. Included hardware (M8x1.25 screws and two 8mm dowel pins) should be used to attach custom bases to MagWings. Refer to the dimensional drawing below for fastener locations. Consult our Applications Team for help with sizing for COBOT applications as we will consider payload, reach, mounting surface and attitude.

Sold as individual units, most applications require two or more MagWings.

Custom mounting plate, bolt and dowel patterns can be incorporated. Contact Magswitch for more information

SPECIFICATIONS

• ¹Determined in a laboratory environment on 2” thick SAE1018 Steel with a surface roughness of 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.
• ²All data applies to units with flat pole shoes installed.
• ³Values may vary by +/- 5%.
  
• ⁴Maximum forces listed above are not safe lifting forces. Designers must take into account safety factors when specifying tools. Magswitch recommends SWL = 10:1 for most applications.

Downloads

MagWing 10 Downloads

• 88001778 - MagWing 10 Spec Sheet
• 88001778 - MagWing 10 STEP File
• 88001856 - MagBase 10 2.0 Operations Manual 1101905

Magswitch Downloads:

• Automation Catalog
• Magswitch Manual Catalog
• Welding & Fabrication Brochure
• MAC Declaration of Incorporation – Assembly Manual ( English | Spanish | German | French)