Magswitch arrays can be anchored flat or pivoted to allow mounting to cylindrical ferromagnetic surfaces and feature a wide footprint to reduce the risk of peel and pry when the end effector is at its greatest radius. Refer to the dimensional drawing below. The standard mounting plate is ready for mounting FANUC CRX-10, UR10, and UR16 COBOTS. Custom mounting plate and patterns can be incorporated; contact Magswitch for more information about customization.

This replaces MagBase 10 Product # 81001289.

Consult our Applications Team for help with sizing for COBOT applications as we will consider payload, reach, mounting surface and attitude.

SPECIFICATIONS

• ¹Determined in a laboratory environment on 2” thick SAE1018 Steel with a surface roughness of 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.
• ²All data applies to units with flat pole shoes installed.
• ³Values may vary by +/- 5%.
  
• ⁴Maximum forces listed above are not safe lifting forces. Designers must take into account safety factors when specifying tools. Magswitch recommends SWL = 10:1 for most applications.

Downloads

Cobot MagBase 10 2.0 Downloads

• 88001856 - MagBase 10 2.0 Magnet Spec Sheet
• 88001856 - MagBase 10 2.0 Magnet STEP File
• 88001856 - MagBase 10 2.0 Operations Manual 1101905
• 88001856 - MagBase10 2.0 2D Drawing

Magswitch Downloads:

• Automation Catalog
• MAC Declaration of Incorporation – Assembly Manual ( English | Spanish | German | French)