Magswitch and Fanuc CRX
×
Magnetic Mounting for the FANUC CRX Series
FANUC's CRX cobots are built to be safe, flexible, and quick to implement, with simple drag-and-drop programming and a small footprint that fits almost anywhere. Magswitch adds the one thing they don't ship with: a magnetic base that lets a CRX dock on flat or curved steel in seconds, no bolts, no compressed air, no fixed stand.
The Cobot Platform. Magswitch Makes It Mountable.
FANUC's CRX collaborative robots are built to be safe, flexible, and quick to implement, with drag-and-drop programming and 8 years of maintenance-free operation across the lineup. Magswitch adds the missing piece: a magnetic base that lets a CRX dock anywhere there's steel.
Easy to Power
Every CRX model runs on standard 120V power. Pair it with a Magswitch MagBase and a cell needs no special electrical infrastructure to stand up.
Small Footprint
The CRX's compact form factor makes it easy to place. A MagBase means you can place it directly on steel, with no fixed stand to design around.
Quick Set-Up
FANUC-approved gripper installation and changeovers pair naturally with a MagBase that mounts or relocates in minutes, no bolts required.
A Power-Free Dock for Your CRX Cell
Magswitch replaces bolted or vacuum-based cobot docks with a switchable magnetic base, built to hold, release, and relocate without external power.
Anchor Flat or Curved
Pivoting magnetic arrays mount to flat plate or cylindrical steel alike, with a wide footprint that reduces the risk of peel and pry when the CRX arm is at full reach.
See mounting options →Weld-Safe by Design
Electrically isolating bushings and washers at each pivot point decouple welding and static transient voltages from the robot ground, so the MagBase can sit close to live weld cells.
Read the safety FAQ →Power-Free Holding
A twist of the wrist engages or releases the magnetic hold, no compressed air, no vacuum lines, and no standing power draw while the cobot is docked.
View full specs →
Cobot MagBase 10 2.0 · 88001856
Magswitch arrays anchor flat or pivoted, ready for mounting to cylindrical ferromagnetic surfaces with a wide footprint that reduces the risk of peel and pry when the end effector is at its greatest radius. The standard mounting plate is ready for FANUC CRX-10, UR10, and UR16 cobots, with custom mounting plates available on request. This unit replaces MagBase 10 Product # 81001289.
| Specification | Value |
|---|---|
| Nominal Maximum Breakaway Force | 22,072 N / 4,963 lbf |
| Nominal Maximum Shear | 4,846 N / 1,090 lbf |
| Full Saturation Thickness | 0.5 in / 12.7 mm |
| Net Weight | 66 lbs / 30 kg |
| Individual Magnetic Pole Footprint | 2.8" x 11.7" / 71mm x 296mm |
| Overall Footprint | 5.6" x 14.8" x 15.6" / 143 x 376 x 396mm |
| Standard Mounting Compatibility | FANUC CRX-10, UR10, UR16 |
Values determined in a lab environment on 2 inch thick SAE1018 steel with optimized pole shoes. Actual breakaway force and safe working load vary by application; Magswitch recommends a 10:1 safe working load ratio. Consult a Magswitch Applications Engineer before deployment.
From Pick to Unload, Magnetically
A FANUC CRX docked on a Cobot MagBase, paired with a Magswitch E-Series gripper, handles the full cycle in a fabrication or welding cell.
Pick
The E-Series gripper lifts a laser-cut part from a stack, even with oil, scale, or surface texture.
Detect
Integrated part-present sensing confirms the correct part was picked before the cycle continues.
Place
The CRX, docked on its MagBase, positions the part in a fixture with repeatable accuracy.
Present
The part is presented to a welding robot or operator for its weld sequence with minimal repositioning.
Unload
Finished parts return to a pallet or staging area, and the cycle repeats.
Built for Real Metalworking Environments
Sheet Metal Pick-and-Place
Grips securely on oily, perforated, or textured steel that vacuum systems struggle to seal against.
Part Presentation to Welders
Keeps parts aligned and repeatable even when tack welds introduce heat distortion.
Material Staging & Kitting
Moves nested laser-cut parts, blanks, and formed components with less ergonomic strain.
Bin Picking & Sheet Separation
Supports variable-flux grippers that isolate the top sheet of a stack and handle mixed thicknesses.
Automated Fixturing
Positions or stabilizes workpieces during assembly, supplementing manual welding tables.
Vertical & Pipe Mounting
Docks a CRX to pipe, tube, or curved hull sections for field welding and inspection work.
Serving Automation Across Metalworking
Pick-and-Place to Fixturing: Magswitch Elevates Cobots in Metalworking
How Magswitch magnetic grippers and cobot bases unlock speed, flexibility, and precision in collaborative robot workflows, from bin picking to automated fixturing.
Read the article →Frequently Asked Questions
Common questions about mounting a FANUC CRX cobot on a Magswitch MagBase.
Which cobots does the MagBase 10 mount to?
The standard mounting plate on the Cobot MagBase 10 2.0 is ready for FANUC CRX-10, Universal Robots UR10, and Universal Robots UR16. Custom mounting plates and patterns can be built for other robot platforms; contact Magswitch for details.
Can it mount on curved or pipe surfaces?
Yes. The magnetic arrays can be anchored flat or pivoted, letting the base grip cylindrical ferromagnetic surfaces such as pipe, tube, or a curved hull section. A wide footprint reduces the risk of peel and pry when the cobot arm is extended to its greatest radius.
Is it safe to use near welding operations?
Each pivot point on the magnetic array includes electrically isolating bushings and washers, decoupling welding and static transient voltages on the part or substrate from the robot ground. This makes the MagBase suitable for cells where cobots work close to active welding.
How much holding force does the MagBase 10 provide?
The Cobot MagBase 10 2.0 is rated for a nominal maximum breakaway force of 22,072 N (4,963 lbf) and nominal maximum shear of 4,846 N (1,090 lbf) at full saturation thickness. Actual holding force depends on material thickness, surface condition, and application; Magswitch recommends a 10:1 safe working load ratio and testing before deployment.
Does it work alongside Magswitch EOAT tools like the E-Series?
Yes. In a typical cell, the CRX docks on the Cobot MagBase for stable, power-free mounting while a Magswitch E-Series or Cobot SmartMagGrip E30 handles the pick-and-place gripping at the end of the arm, giving the whole workflow magnetic holding from the base to the tool.
How do I get help sizing a MagBase for my application?
Magswitch's Applications Engineering team can help size a MagBase for your specific setup, factoring in payload, reach, mounting surface, and attitude. Use the contact form below or reach out directly to get started.
Ready to Mount Your CRX on a Magswitch Base?
Tell us about your cell, and a Magswitch Applications Engineer will help you size the right MagBase for your payload, reach, and mounting surface.
- Free sizing consultation for payload, reach, and mounting attitude
- Custom mounting plates for FANUC, UR, and other robot platforms
- Guidance combining MagBase docking with E-Series EOAT grippers
- Fast quote turnaround from our Automation team