• Industries
• Automotive
• Manufacturing
• Municipalities
• Shipbuilding
• Welding and Fabrication

Welding and Fabrication Fixturing

“The MagSquare 400 is a high-quality product. The magnet is very strong. I used three of them to make a mag base for my laser tracker. My base cost me a fraction of the price and its way more powerful than the mag bases on the market.”

- JACK, MagSquare 400

Featured Video

Welding Tools/Fabrication Tools

MagSquares

Fixturing, Workholding, Mounting

Magswitch magnetic squares are the most versatile workholding and fixturing tool ever! Align and secure flat or round pieces of steel to fabricate angles. Pull corners, secure steel for cutting, use as a guide or make your own fixtures with our MagSquares.

• The multiplane magnetic grip on 5 sides
• Machined at 90 degrees with pre-tapped holes for mounting
• Mounts anywhere - no limitations like clamps
• Magnet turns completely On and Off
• Stays clean as it is easy to wipe debris off
• Does not require an electrical power source
• Holds flat and round surfaces of steel

Ground Clamps

Magswitch magnetic ground clamps come with a new fin design which lowers the temperature. With our ground clamps, no more tacking is necessary. Simply place our magnetic ground clamp on a clean work surface, turn it on and start welding!  

• Fast setup as it instantly grounds to flat and round surfaces of steel
• Stronger hold in the shear (vertical) position allows for use with heavy gauge cable
• No more tacking on tabs and searching for ground location
• The new fin design lowers the temperature by 27%
• Magnet turns completely On and Off
• Stays clean as it is easy to wipe debris off
• Does not require an electrical power source

Mini Angles

Mini Angles are our magnetic workholding tool with multiple angles in one! They offer a wide range of angles: 45/135°, 60/120°, 75/105°, and 90° angles. Extremely versatile welding and fabrication angle tools. 

• Accommodates flat sheets and pipes
• Offers several common angles
• Sturdy and compact 
• Magnet turns completely On and Off 
• Stays clean 
• Does not require an electrical power source 
• Holds flat and round surfaces of steel

Pivot Angles

Magswitch magnetic pivot welding angles offer a range of angles from 20 to 270 degrees with 5-degree indicators and detents. Two sides of the tool magnetize when turned on and can be secured to a table or wall to hold a fixture in place.

• Single lock at the elbow to secure your angle 
• The dial on the elbow has indicators every 5 degrees 
• Detents at every 45 degrees for rapid adjustment 
• Magnets turn completely On and Off 
• Does not require an electrical power source 
• Holds flat and round surfaces of steel

90 Degree Angles

Magswitch 90 Degree Angles deliver superior accuracy, efficiency, and speed at a fixed 90-degree welding angle. Simply adjust the MagSquares by sliding them up or down on each axis for unmatched versatility. 

• Lightweight with incredible strength 
• Precision positioning 
• MagSquares can be reversed on each axis 
• Magnets turn completely On and Off 
• Does not require an electrical power source 
• Holds to flat and round surfaces of steel

BoomerAngles

Magswitch BoomerAngles feature a rotating MagSquare at each axis which provides virtually unlimited angles including a pre-set for 90-degree holding. Easy On and Off by rotating the black knobs.

• Adjustable angle holds 
• Position for odd angles in seconds 
• Non-marring hold 
• Magnets turn completely On and Off 
• Does not require an electrical power source 
• Holds flat and round surfaces of steel

MagVises

Magswitch MagVises that you don’t have to bolt in place! Perfect for drilling, cutting, grinding, and beveling small to medium size pieces. Switch On/Off for magnetic hold force by rotating the knob. When you’re done, just carry it to where it’s needed next.

• Offers 45/135° + 60/120°+ 75/105° + 90° angles 
• Doubles as a multi-angle workholding tool 
• Vise options include round, angle stock, square bar, or flat 
• Magnet turns completely On and Off
• Does not require an electrical power source 
• Holds flat and round surfaces of steel

MagWheels

Magswitch magnetic wheels have a powerful connection to drive units on any ferrous surface enabling flat, vertical, or inverse travel. Ideal for positioning and guiding, sheet feeding, pipe handling, fitting and fabrication, and numerous OEM automation and fixturing applications.

• Magnetic rotating elements with the potential to automate 
• Non-marring hold 
• Can be fitted with drive units for mobile applications 
• Climbing, carrying and driving anywhere above/below the magnetic surface 
• Magnet turns completely On and Off 
• Does not require an electrical power source 
• Holds to flat and round surfaces of steel

MagMounts

Magswitch MagMounts allow for easy movement and placement of a tool. With a single On and Off lever, you have a strong magnetic hold force at your disposal. The top of the tool is ready for mounting a variety of accessories.

• Fixed bar magnet is for flat steel 
• Swivel bar magnet is for round or uneven shapes 
• Multiple threaded holes on the top 
• Perfect for top mount tools, measuring and security devices  
• Magnet turns completely On and Off
• Does not require an electrical power source 
• Holds flat and round surfaces of steel

MagTethers

Magswitch MagTethers help you tether you or your equipment while working above and below water. Our MagTether is sealed with a marine grade corrosion resistant coating to hold up to saltwater.

• Safety latch to turn On and Off 
• Quick connect and disconnect 
• Alongside and below the surface mooring 
• Noise suppressing coating 
• Ideal for underwater tethering, military, and commercial oil and gas applications
• Magnet turns completely On and Off
• Does not require an electrical power source

MagHooks

Need a helping hand? Organize your workspace with our magnetic hook by hanging tools, lights, wires, cables, and more.

• Instantly attaches to flat and round surfaces
• Locking hand for safety
• Lightweight and reliable
• Convenient and easily move from job to job
• Magnet turns completely On and Off
• Does not require an electrical power source

MagYoke

The permanent magnetic Yoke gives the user the ability to perform magnetic particle inspection without an electrical power source. It has all the advantage of a permanent Yoke system without the problems related to the adhesion of metal particles.

• Non-destructive testing of weld joints
• Full yoke system testing capabilities 
• Using patented ON-OFF switchable magnets, test welds without an electrical power source 
• The OFF position allows the tool to easily be removed from the material 
• Significantly reduces metal-to-metal sparking
• Lightweight and compact