Cordless Electric (CE) 440 Magnetic Lifter - 8140976

Cordless Electric (CE) 440 Magnetic Lifter - 8140976

Cordless Electric (CE) 440 Magnetic Lifter - 8140976

Write a review
Sold out
$2,110.99 USD
Shipping calculated at checkout.
Quantity must be 1 or more

Magswitch heavy-lifting cordless electric (CE) Magnetic Lifters are the new generation of SPM battery magnets.

Lifting Device Features

  • Great for removing small parts from a burn table.
  • Lightweight and compact, the CE 440 is perfect for guiding smaller pieces around a shop.
  • Automatic on/off actuation when landing and placing the workpiece in AUTO mode.
  • 3:1 safety factor.
  • Fails safe – no power required once actuated.
  • 400 operation cycles before recharging 2h by the power supply of 110V / 230V.
  • Variable Flux Output (VFO) for de-stacking (1/4in min)
  • On tool button

IMPORTANT note ASME B30.20 standards take precedence over all data provided. We strongly advise operators to be familiar with this standard prior to using any underhook lifter.

Specifications

  • Maximum Breakaway Force 1,2: 1320lb / 600 kg
  • Breakaway Force @ SWL 3:1: 440lb/200kg
  • Minimum Thickness for De-Stacking3 – VFO capable: Level 1: 1/4in / 6mm, Level 2: 5/16in / 8mm, Level 3: 13/32in / 10mm
  • Charging Supply Voltage: 110V/230V
  • Charging Time: 2 hours
  • Number of Cycles per Charge: 400
  • Net Weight: 22lb / 10kg
  • Mounting Option: Single Hoist Ring
  • Hold Surface (L x W): 4.5in x 2in
  • Dimensions (L x W x H): 5.9in x 3.3in x 5.9in

Determined in a laboratory environment on SAE1018 Steel with a surface roughness of 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.All data applies to units with standard combination V/flat pole shoes installed.Determined with SAE1018 Steel L=200mm W=200mm.Maximum forces listed above are not safe lifting forces. Designer must take into account safety factors when specifying tool. Magswitch recommends SWL = 3:1 for most lifting applications.

CE 440 Air gap <0.1mm Air gap 0.1 to 0.3mm Air gap 0.3 to 0.5mm
Material Thickness mm [in] Max. Load kg [lbs] Max. Load kg [lbs] Max. Load kg [lbs]
4 [0.157] 35 [77] 30 [66] 30 [66]
6 [0.236] 70 [154] 65 [143] 60 [132]
10 [0.393] 135 [297] 130 [286] 120 [264]
16 [0.629] 190 [418] 185 [407] 170 [374]
20 [0.787] 200 [440] 190 [418] 180 [396]

Downloads

CE 440 Magnetic Lifter Downloads:

Magswitch Downloads:

Back to MAGNETIC LIFTING PRODUCTS