LEGACY E30 – 81401213

This tool has been superseded by 81401263.
This product is now in Legacy status and should no longer be deployed in new projects. All documents are for reference use only. See table below for important dates.

Magswitch is excited to introduce our first ever electrically actuated line of automation products – the all NEW E Series! Combining Magswitch’s patented core technology with revolutionary smart tool capabilities and an electric actuation, the E30 allows Magswitch to offer even more advantages than ever before! The all new Variable Field Output (VFO) allows the tool to de-stack thin material and optimize performance for your component. Once the part is gripped and separated from adjacent parts, the tool can be switched to full power for maximum performance.

Features & Benefits
• Slim profile optimized for EOAT applications
• 24VDC operation below 1A (E30)
• CANopen communication
• Combine power and communication in one cable
• Smart tool
• Variable Field Output (VFO)
• Destack thin parts
• Enhanced bin pick capabilities
• Fail-Safe


SKU: 81401213.


Maximum Breakaway Force 1,2 124.2 lb / 56.3 kg
Maximum Shear 1,2 39.7 lb / 18 kg
Minimum Thickness for De-Stack 3 0.20 in / 5 mm
Net Weight 1.94 lb / 0.9 kg
Connector Type Male M12 –5 Pin –A-coded
Mounting Options Ø6-M8-Ø6 NAAMS pattern
Nominal Supply Voltage 24 V DC


Material Thickness – mm (in) 0.5
Maximum Force – kg (lbs) 6.2


SWL (Safe Working Load) = Maximum Force 5/ Safety Force (≥5)

1 Determined in laboratory environment on 2” thick SAE1018 Steel with surface roughness 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.
2 All data applies to unit with flat pole shoes installed.
3 Determined with SAE1018 Steel L=200mm W=200mm.
4 Values may vary by +/- 5%.
5 Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying tool. Magswitch recommends SWL = 5:1 for most applications.

Contact Us

Use the form below for product inquiry. Need application assistance? Click here instead!


Check out our E Series in Action at Fabtech here!