AR50 2.0 Automation Magnet | Magswitch Technology

Magswitch AR50 2.0 – 81401167

Magswitch AR50 2.0 is compact and powerful boasting cutting edge technology enhancements and precision mounting interfaces. These tools are great for fixtures, pin locating and thin part material handling. Additional custom pole shoe geometry allows for extreme flexibility in applications. This tool is a precision fit for your next project!

Features & Benefits
• Compact single magnet design
• In case of power loss and maintenance inspections, the external manual override is included which saves the day
• Manufactured to precision tolerances with symmetrical NAAMS mounting
• Customizable contact surface
• Maximum power to weight ratio
• Saves energy – 90% less air
• Fail-safe operation

Accessories
8800881 Flat/V Combination Pole Shoe Kit
8800797 AR50 2.0 M8 Prox Sensor Bracket Kit

*Pole Shoes are required. Not Included with base tool.

SKU: 81401167.

Category: Automation.

Tag: AR Series

Specifications

Maximum Breakaway Force ^1,2	476 lb / 216kg
Maximum Shear ^1,2	165 lb / 75 kg
Minimum Thickness for De-Stack ³	3/8 in / 9.5 mm
Maximum Allowable Pressure	90 psi / 6.2 Bar
Off Target Actuation Pressure	58 psi / 4.0 Bar
Net Weight	4.9 lb/ 2.2 kg
Air Port Thread	2x M5 x 0.8
Mounting Options	Side: 3x NAAMS Ø8-M8-Ø8
Magnetic Pole Footprint	64 x 52 mm

Material Thickness – mm (in)	0.5 (.019)	1 (.039)	2 (.078)	3 (.118)	4 (.157)	5 (.196)	6 (.236)	7 (.28)	9.5 (.37)	12.7 (.5)
Maximum Force – kg (lbs)	13.2 (29.0)	31.7 (70.0)	58.2 (128)	96.5 (213)	122 (269)	168 (370)	184 (406)	199 (438)	215 (475)	216 (476)
Required Air Pressure ⁴ – bar (psi)	4.0 (58)	3.0 (44)	2.6 (38)	2.0 (29)	1.8 (27)	1.6 (24)	1.6 (24)	1.4 (21)	1.4 (21)	1.4 (21)

SWL (Safe Working Load) = Maximum Force ⁵/ Safety Force (≥5)

¹ Determined in laboratory environment on 2” thick SAE1018 Steel with surface roughness 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.
² All data applies to unit with flat pole shoes installed.
³ Determined with SAE1018 Steel L=200mm W=200mm.
⁴ Values may vary by +/- 5%.
⁵ Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying tool. Magswitch recommends SWL = 5:1 for most applications.