Magswitch PLAY20X4 NAAMS - 81401096

Magswitch PLAY20X4 NAAMS - 81401096

Magswitch PLAY20X4 NAAMS - 81401096

Magswitch PLAY20x4 brings the power of multiple magnets together with a single point of actuation. Use these tools when handling long pipes or beams. This tool is built for handling long pipes or beams as well as heavyweight applications. Contact our engineers to customize the design and to fabricate custom pole shoes for your application at applications@magswitch.com.

Request Pricing

FEATURES & BENEFITS

  • Customizable Contact Surface
  • Deep field technology
  • Ideal for handling long components
  • Saves energy
  • Fail-safe operation

*Pole Shoes are required. Not Included with base tool.

SPECIFICATIONS

Max Breakaway* 288.42lbs / 131.1kg
Working Load 4:1* 72.1lbs / 32.8kg
Full Saturation Thickness 3/8” / 9.5mm
Max Shear 2:1* 41.8lbs / 19.0kg
Minimum Thickness for De-Stack 3/8″ / 9.5mm
Min Actuation Pressure 30psi / 2.1×105pa
Max Actuation Pressure 145psi / 1.0×106pa
Off Target Pressure 56psi / 3.9×105pa
Volume of Actuator 15cm3
Net Weight 2.62lbs / 1.19kg
Air Port Thread M5 x 0.8
Mounting Thread 6-M8-6 NAAMS
Overall Height 138.76mm
Magnetic Pole Footprint 96.2 x 31.12mm
Material Thickness – mm (in) 0.4
(.016)		 0.6
(.024)		 1.0
(.039)		 1.5
(.059)		 1.9
(.075)		 2.7
(.106)		 3.5
(.138)		 4.76
(.187)
Maximum Force – kg (lbs) 6.00
(13.2)		 8.90
(19.6)		 17.83
(39.3)		 26.57
(58.6)		 43.03
(94.9)		 57.37
(126.5)		 77.40
(170.6)		 83.43
(183.9)

*Max Breakaway determined in laboratory environment on 2” thick SAE1018 Steel with surface roughness 63 micro inches. Many factors contribute to the actual breakaway force in each application. Always test the magswitch in each application before deployment. Refer to the magswitch information booklet for more information.

  • SWL (Safe Working Load) = Maximum Force5/ Safety Force (≥5)
  • 1Determined in laboratory environment on 2” thick SAE1018 Steel with surface roughness 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.
  • 2All data applies to unit with flat pole shoes installed.
  • 3Determined with SAE1018 Steel L=200mm W=200mm.
  • 4Values may vary by +/- 5%.
  • 5Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying tool. Magswitch recommends SWL = 5:1 for most applications.

Downloads

PLAY20X4 NAAMS Downloads:

Magswitch Downloads: