Magswitch PLAY50x3 - 8140393
Magswitch PLAY50x3 delivers the power of multiple magnets together with a single point of actuation. This tool is built for handling long pipes or beams as well as heavyweight applications. Contact our engineers to customize the design and to fabricate custom pole shoes for your application at firstname.lastname@example.org.
FEATURES & BENEFITS
- Deep field technology
- Customizable Contact Surface
- Best for handling long components
- Saves energy
- Fail-safe operation
ACCESSORIES (Sold Separately)
|8800293||Prox Cap Kit for PLAY50x3/4/PLAY70x2|
*Pole Shoes are required. Not Included with base tool.
|Max Breakaway*||1652lbs / 751kg|
|Working Load 4:1*||413lbs / 187kg|
|Full Saturation Thickness||1/2” / 12.7mm|
|Max Safe Shear*||169lbs|
|Minimum Thickness for De-Stack||1/2” / 12.7mm|
|Min Actuation Pressure||17.1psi / 1.2×105pa|
|Max Actuation Pressure||145psi / 1×106pa|
|Net Weight||17.4lbs / 7.9kg|
|Air Port Thread||Rc 1/4|
|Mounting Thread||M8 x 1.25|
|Custom Pole Shoe Mount Thread||M8 X 1.25 X 10mm|
|Magnetic Pole Footprint||165.80 x 71.12mm|
|Actuator Part Number||280018|
* Max Breakaway determined in laboratory environment on 2” thick SAE1018 Steel with surface roughness 63 micro inches. Many factors contribute to the actual breakaway force in each application. Always test the magswitch in each application before deployment. Refer to the Magswitch information booklet for more information.
- SWL (Safe Working Load) = Maximum Force5/ Safety Force (≥5)
- 1Determined in laboratory environment on 2” thick SAE1018 Steel with surface roughness 63 micro inches with optimized pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a Magswitch Applications Engineer and test the Magswitch in each application before deployment.
- 2All data applies to unit with flat pole shoes installed.
- 3Determined with SAE1018 Steel L=200mm W=200mm.
- 4Values may vary by +/- 5%.
- 5Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying tool. Magswitch recommends SWL = 5:1 for most applications.